Universal Laser Systems Industrial ILS12.150D, Инструкция по установке и настройке

Страница: 16 / 36

Installation & Set-up Guide
16
Observe the “V” groove along the upper (3) and lower (2) part of the laser cartridge base plate 3.
and the alignment plate (1) at the end of the base plate.
If you have purchased two laser cartridges, mount the first cartridge onto the lower mounting 4.
blocks first. Single laser users should mount the laser cartridge in the top position.
Pick up the laser cartridge by the ends and tilt it at a 30 degree angle as shown (1). Mount the 5.
cartridge onto the mounting blocks shown in step 2 (page 15) by placing the upper “V” groove
on top of the mounting blocks. Slide the cartridge to the right until the outer edge (2) of the
alignment plate contacts the inside edge of the large plate of the alignment fork.