Universal Laser Systems Industrial ILS12.150D, Инструкция по установке и настройке

Страница: 17 / 36

Assembling Your ILS System
17
Slowly rotate the laser cartridge, making sure that the alignment plate is centered in the gap in 6.
the alignment fork. As you slowly release the weight of the laser, you should feel it lock itself
smoothly into place.
Never force the laser into position. If the laser does not install
smoothly, check for obstructions such as pinched wires or hoses or a binding laser latch. Once
installed, verify that the alignment plate is centered within the alignment fork.
Plug in the power connector (1) to the corresponding laser cartridge. The power connector is 7.
labeled Top (2) or Bottom (3). Single laser cartridge users should leave the bottom connector
unplugged and out of the way.
Close the rear cover, making sure that wires or hoses do not become pinched when the cover is 8.
closed. Gently close the rear cover until the sliding latches lock into place.
Once the laser cartridge has been installed, proceed to 9. “Laser System Leveling” on page 18.