Universal Audio Apollo Twin MkII, Руководство по оборудованию

Страница: 18 / 38

Apollo Twin MkII Hardware Manual Controls & Connectors 18
Selected Channel
The currently selected input channel is shown by the CH1 and CH2
indicators at the upper left of the main display panel, above the input
meters. The top panel controls only adjust the functions for the currently
selected channel.
Changing Channels
When in Preamp mode, press the PREAMP button to change the selected channel so its
controls can be adjusted. Press PREAMP again to switch back to the other channel.
Input Source
The Mic, Line, or Hi-Z input is routed into the channel’s preamplifier. The
input source is shown by the indicators below the input meters.
The Mic or Line input source is selected by the pressing the INPUT button
when the channel is selected. The Hi-Z input (available on channel 1 only)
is selected automatically when and instrument cable is plugged into the
Hi-Z input on the front panel.
Note: Only one input type at a time (Mic, Line, or Hi-Z) can be used as a
channel’s input source.
Preamp Options
Each input channel has a set of preamp
options. The preamp options for the
currently selected input channel are
activated using the row of six buttons
at the bottom of the top panel when in
PREAMP mode.
The current state of the preamp options are indicated in the upper row of the options
display panel above the option buttons. Available options are dim when inactive, bright
when enabled, and unlit when unavailable.
Note: Not all preamp options are available with all input types. For specific
details, see the Top Panel Controls section later in this chapter.
MONITOR
MONITOR
MONITOR