Universal Audio Apollo Twin MkII, Руководство по оборудованию

Страница: 19 / 38

Apollo Twin MkII Hardware Manual Controls & Connectors 19
MONITOR Mode
When Apollo Twin MkII is in Monitor mode, all top panel controls are related
to output functions only. To adjust any output function, press the MONITOR
button to enter Monitor mode and activate the monitor controls.
Note: Input functions cannot be performed in Monitor mode.
Important: Apollo Twin MkII must be in Monitor mode to change the volume of the
monitor and headphone outputs.
Stereo Outputs
Apollo Twin MkII has two stereo outputs that can be controlled with the top panel
hardware: Monitor and Headphone. The stereo outputs are independently controlled.
Note: Line outputs 3 and 4 are controlled with software only.
Output Controls
The Level knob is used to set the volume level for each stereo output independently. The
Level knob adjusts the volume for the currently selected stereo output. After switching
the selected output with the MONITOR button, the other output volume can be adjusted.
Output Selection
The currently selected stereo output is shown by the MONITOR and
HEADPHONE indicators at the right of the main display, above and below
the output meters.
When in Monitor mode, press the MONITOR button to change the selected
output. Press again to switch to the other output. The Level knob adjusts
volume for the currently selected output.
Monitor Options
Apollo Twin MkII has monitor options
that perform the functions of dedicated
monitor controller. The monitor options
are controlled using the row of six buttons
at the bottom of the top panel when in
MONITOR mode.
The current state of the monitor options are indicated in the lower row of the options
display panel above the option buttons. Available options are dim when inactive, bright
when enabled, and unlit when unavailable.
Note: Not all monitor options are always available. For specific details, see the Top
Panel Controls section later in this chapter.
MONITOR
MONITOR
MONITOR