Unitek TVD6.2-RS, Руководство пользователя

Страница: 42 / 50

Transistor-Servo-Drive TVD6.2-RS
42
Default setup
check connections before putting into operation
- mains connection clamps X3:3, X3:4, X3:5
max. 460V~
- protective conductor earth screw at case
- motor connection clamps X3:7, X3:8, X3:9
- motor earth connection
clamps X3:6
- option
- external ballast resistor
clamps X3:1 and X3:2
mind connection advices on page 12.
Encoder connection X7
pay attention to the motor specific
connection sheets. See appendix A
Basic connections-supply lines
- protective conductor
- mains
1x oder 3x 400V~
- motor 3x mot earth con screen
- encoder pay attention to the motor specific
connection sheets.
Basic connections - control lines
enable contact betweem X1:1 and X1:2
nominal value signal X1:4, GND X1:8
limit switch limit switch at X1:16 and X2:32
or bridge X2:27 to X1:16, X2:32
Default adjustment for first putting into operation
switch S4 P-amplification position 4
switch S5 I-component position 4
potentiometer I
max1
peak current 10%
potentiometer I
max2
peak current 10%
potentiometer I
D
steady current 100%
potentiometer Xp amplification 50%
potentiometer INT integrator anti-clockwise stroke
potentiometer n
max
speed anti-clockwise stroke
Jumper
unplugged plugged
S2, S14, S18 J1, J2, J3, J4
S3, S6, S11, S12, S19, S20
SW1 Pos.1-2 SW1 Pos.2-3
SW2 Pos.1-2 SW2 Pos.2-3
G
et
tin
g
St
a
rte
d