Unitek BAMOCAR-PG-D3-700-900, Руководство пользователя

Страница: 40 / 50

Control connections
Version: 2020 / V3 Seite: 39 BAMOCAR-PG-D3-700-900
4.9 Resolver connection
Only with BAMOCA-PG-D3-RS
The resolver is an absolute measuring system
for one motor revolution.
It is robust and insensitive to high motor
temerpatures.
The design corresponds to rotation
transformer.
The rotor is supplied by the reference
(10 kHz).
The stator supplies the sine and cosine signals
modulated by the rotation frequency.
In the servo amplifier the amplitudes of these
signals are evaluated and digitized.
The resolution is automatically set to
10, 12 or 14 bits.
The maximum possible speed is 50 000 rpm
(10 bit).
The digitized signals are used for the polar
wheel angle, the position control, the speed
control and incremental output.
Only use motors with a 2-, 4-, 6- or 8-pole resolver which have been approved by the manufacturer.
Connector X7 14-pin Tyco type connector
Connecting cable 4 x 2 cores, twisted in pairs and shielded, additional overall shield.
For link chains use appropriate cables!
Min. cross-section 0.25 mm
Cable length for >25 m only use high-quality resolver cables with adequate
shielding properties.
Shield connection across connector X7 combine all shields and connect
them to the housing
across the motor connector connect the overall shield to the
connector housing
Setting parameters see software Manual NDrive