Unitek BAMOCAR-PG-D3-700-900, Руководство пользователя

Страница: 30 / 50

Electrical installation
Version: 2020 / V3 Seite: 29 BAMOCAR-PG-D3-700-900
3.7 Power connections
PG cable gland
metal M32 x 1.5 with shield contact
Connection - Motor U
Connection - Motor V
Connection - Motor W
Connection - Battery pos. pole
Connection- Battery neg. pole
Connecting cables max. 95 mm²
Assembly :
Only shielded cables to be used!
Connection example :
Adapt the dimensions to the cables and cable glands used!
Strip outer insulation to 34..38 mm. Shorten shield to 10 mm. .
Strip inner insulation. Copper strand to 7-12 mm.
Cable lug insulation 25 mm (braided sleeve
or heat-shrink tubing).
Cable lug for M10 screw.
Push on the PG cable gland with shield springs.
Push on cable lug insulation.
Press the cable strands into the cable lug (15 mm)
Screw the PG gland into the device.
Screw the cable lug onto the internal busbar.
Tighten the cap of the PG gland.
Tighten the cable gland on the cable lug.
Connection screw : M10 x 20 (self-locking or corrugated washer, no toothed washer)
Maximum tightening torque 35 Nm
Note: The cable gland is not included in the delivery scope.