Unitek BAMOCAR-PG-D3-700-900, Руководство пользователя

Страница: 39 / 50

Control connections
Version: 2020 / V3 Seite: 38 BAMOCAR-PG-D3-700-900
4.8 CAN-BUS
The CAN-BUS is a digital connection to the CNC control.
Optimum conditions are achieved with CNC controls and CAN components of LABOD electronic
or CAN Open.
Programming and operation by means of the control panel via the CAN-BUS.
Interface complies with the standard ISO 11898.
Adjustment and programming see Manual NDrive and CAN Manual.
CAN-BUS-Kabel
Use a shielded bus conductor with a
low shielding capacity.
LiYCY 3 x 0.25 + shield
.
Designation Connector Cable colour Cable no.
CAN-H X1:31,32 green 3
CAN-L X1:33,34 yellow 2
CAN-GND X1:35 white 1
Shield X1:1
CAN BUS Connection with multiple BAMOCAR-PG-D3-700-900
Master Address xx Address xx Address xx
Terminating resistor at both ends of the bus line > 120 Ω between CAN-H and CAN-L.