United Technologies Interlogix TruVision DVR 45HD, Руководство пользователя

Страница: 64 / 172

62 TruVision DVR 45HD User Manual
Chapter 10
Camera setup
Use the Camera Setup menu to configure analog and IP cameras. You can also
configure the camera OSD, snapshots, recording settings, image quality, motion
detection, privacy masking, camera tampering, VCA settings, PTZ configurations, V-
stream settings, and people counting.
Note : Not all settings are available for IP cameras. For advanced IP camera settings,
please consult the IP camera web browser interface.
Supported cameras
The recorder supports the following cameras:

HD-TVI cameras up to 5MPX. Both TruVision and third party cameras are
supported. HD-TVI cameras are encoded as H.264 streams.

Standard analog cameras

TruVision IP cameras up to 4MPX. The recorder accepts H.264 and H.265 TruVison
IP cameras.
The analog video inputs on the recorder can automatically detect whether a camera is
analog video or HD-TVI.
Configure the signal input channel
The recorder can support up to 16 cameras depending on the model, which can be a
mix of analog and IP cameras. By default, all camera channels in the recorder are
analog. You need to disable analog cameras in order to add IP cameras.
You can quickly see an overview of all the analog cameras and their status in the
Analog Camera Overview screen (see Figure 20 on page 63). The number of
cameras displayed depends on the recorder model.
When an analog camera is enabled or disabled, the system must reboot for the
changes to take effect.