United Technologies Interlogix TruVision DVR 45HD, Руководство пользователя

Страница: 103 / 172

Chapter 13: Alarm and event setup
TruVision DVR 45HD User Manual 101
• Object Left Behind : A camera has detected that an object has been left in a
designated region, such as baggage.
• Object Removed : A camera has detected that an object has been removed from a
designated region, such as exhibits on display.
• Panel Heartbeat Alarm : This is an intrusion integration event. There is no
communication between the intrusion panel and the recorder.
• Arming Panel Event : This is an intrusion integration event. The intrusion panel has
been armed.
• Disarming Panel Event : This is an intrusion integration event. The intrusion panel
has been disarmed.
• Intrusion Alarm : This is an intrusion integration event. An intrusion alarm has been
triggered by the intrusion panel.
To set up event notifications:
1. From the menu toolbar, click Alarm & Event Setup > Notifications .
2. Check Display Event Icon so that the event icon appears in the OSD in live view
when an alarm or event is triggered (default is enabled).
3. Under Event Hint Settings , click the Actions button. From the drop-down list, select
the desired event notifications to be listed in the alarm center in live view and click
OK . See “Alarm and event notification” on page 99 for the complete list.
4. Select the event priority: VCA < Motion or VCA > Motion. Default is VCA < Motion,
where motion has priority over VCA.
5. Select a technical event notification and how the recorder should respond to it.
Under Notification Type , select the desired technical event notification:
• HDD Full : All installed HDDs are full and will not record any more video.
• HDD Error : Errors occurred while files were being written to the HDD, there is no
HDD installed, or the HDD had failed to initialize.
• Network Disconnected : Disconnected network cable.
• Duplicate IP Address Found : There is an IP address conflict with another
system on the network.
• Illegal Login : Wrong user ID or password used.
• Input/Recording Resolution Mismatch : The input and recording resolutions do
not match.
• Abnormal Record : HDD cannot record any more files. This could be due to the
overwrite option being disabled so recorded files are locked and cannot be
deleted.
Check one or more response method: Enable Alarm Audio, Notify Alarm Host, Send
Email, and Trigger Alarm Output.