United CoolAir MARVEL MINI Скачать руководство пользователя страница 33

Страница: 33 / 64

Installation, Operation and Maintenance Manual

Marvel Mini

Subject to change without notice.

120.9-IM (1218)

DANGER:

BEFORE ATTEMPTING TO TROUBLESHOOT

A SYSTEM ALARM, BE AWARE THAT REFRIGERANT

CONTAINED IN EACH COMPRESSOR SYSTEM AND

HOT WATER OR STEAM FROM HEATING COILS

CAN CAUSE SEVERE BURNS HIGH VOLTAGE AND

OPERATING FAN DRIVES ALSO PRESENT HAZARDOUS

CONDITIONS BE AWARE OF THE DANGERS AND

CONTACT APPROPRIATE PERSONNEL OR CERTIFIED

TECHNICIANS TO SERVICE THE EQUIPMENT

Pressing the alarm button enters the Alarms menu If there

is an Alarm present, the displayed Alarm will look similar to

this example showing time and date of occurrence Press

the

Alarms 0 1 / 0 1

15:35 04/05/17

Comp 1 Low Pressure

If there are no present alarms the NO ALARMS will be

displayed Pressing the enter button with No Alarms

present will enter the Alarm Log The alarm log simply is

a record of the alarms that occurred A total of 64 previous

alarms will be stored into memory If there are no alarm logs

present, the system will not enter the Alarm Logger Press

the Esc button to return to the main status loop

NO ALARMS

Press ENTER to

enter ALARM LOGS

Alarm Logger Record>01

15:35 04/05/17

Comp 2 Low Pressure

Changing Set Points, Parameters, And

Values

Set points, Parameters, and changeable values are known

as Fields Press the enter button to move the cursor to

the field for the desired change. Press the (up) or

(down) button to change the value within that field, and then

press the enter button to save the change into memory

System Status

By default the system remains within the System Status

menu loop if no one has accessed the unit for greater than

five (5) minutes. Simply pressing the (up) or (down)

buttons, scrolls through the available screens within the

System Status menu Each screen in the Status menu

displays the operating conditions or Status of the system

Listed below are the Screens that will appear under System

Status for particular setups based on application setup and

available options

U01 Mon 07:21 03/19/17
Return Hum >

55.0%

Return Temp>

74.7 °F

Supply Temp>

57.2 °F

One Compressor ON

Содержание MARVEL MINI

































































Результаты поиска

Содержание MARVEL MINI

Отзывы:

Похожие инструкции для MARVEL MINI

Бренды по названию

Популярные бренды

United CoolAir MARVEL MINI, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание MARVEL MINI

Отзывы:

Похожие инструкции для MARVEL MINI

Бренды по названию

Популярные бренды