From this dialog, the user can perform a read operation against tags and can provide
the following configurable parameters:
Memory Bank—the target for the read operation, has selectable values of either
the EPC, TID, User, or Reserved memory bank
Offset—the offset in hexadecimal of the first 16-bit word to erase in the target
memory bank
Count—the number of 16-bit words to erase, starting at Offset
Access Pwd—the previously applied access password for the target tag, or no
entry for tags with no access permissions.
Output from block erase operations is directed to the primary application window.
Access Type QT_None
Selecting the QT_None Access Type option displays the configuration dialog shown in
the figure below.
Tag Access dialog box, Access Type QT_None selected and QT Control Access READ option selected
From this dialog, the user can perform a QT control data read or write operation against
tags.
The figure above illustrates the QT Control Access READ option, for which no additional
parameters are required.
Selecting the QT Control Access WRITE option displays additional options in the
configuration dialog shown in the figure below.
Tag Access dialog box, Access Type QT_None selected and QT Control Access WRITE option selected
35
Copyright 2012 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
