35
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
MS912+ User’s Manual
4.2.2 Bluetooth Profile
BT mode – HID
1. Press the trigger for 1 second to activate the scanner.
2. Scan
[DISCONNECT]
3. Scan
[BT mode-HID]
; the scanner will emit several beeps.
4. Select “Wireless Scanner” from discovered device list. (For PC, please
click “Create a pairing code for me”)
5. The Bluetooth application may prompt you to scan a pincode.
6. Follow the steps in
PINCODE SETUP
section the on next page.
7. The scanner will beep twice to verify the connection.
BT mode - SPP
1. Press the trigger for 1 second to activate the scanner.
2. Scan
[DISCONNECT]
3. Scan
[BT mode -SPP]
; the scanner will emit several beeps.
4. Select “Wireless Scanner” from discovered device list.
5. (For PC, please click “Enter the device’s pairing code”)
6. Enter “1234” from the host.
7. Open serial communication software with com port (see Device Manager)
properly set up.
8. The scanner will beep twice to verify the connection.
BT mode - HID non-pincode
1. Press the trigger for 1 second to activate the scanner.
2. Scan
[DISCONNECT]
3. Scan
[BT mode - HID non-pincode ]
; the scanner will emit several beeps.
4. Select “Wireless Scanner” from discovered device list.
5. (For PC, please click “Pair without using a code.
6. .The scanner will beep twice to verify the connection.
