Language sub men
Language Select
中
文
/Chinese
English/
英文
Shortcuts menu
Input shortcut
中文
/Chinese
the menu will display in Chinese
English/
英文
the menu will display in English
Unitech Dcdi 550 sets up total eight input shortcuts (INPUTS), four function
shortcuts (CONTROL), and two picture switch shortcuts (TRANSITION). Input
shortcuts are:“AV1”,“AV2” ,“VGA1”,“VGA2”,“DVI
”，“
HDMI
”、
DP” and
“E.M.” respectively; Function shortcuts
are:“PIP”,“PART”,“AUTO”,“MODE”and Switch shortcuts
are“TAKE”and“EFFECT”.
All the name of the keys and its position of the machine, please refer to the
“
Front panel graphical representation
”[ 8]
。
Note: Unless specifically
mentioned otherwise, all shortcut keys are not effective unless in the "default
state".
In the default state, to any input shortcuts, image 1 signal input port will switch
directly to the input port which is corresponding with the input shortcuts.
Moments later, the menu system will show the input channel state, including port
name, whether the input signal is effective or not, also will show signal resolution
specifications in effective case. About this content, please refer to the“
Default
state introduction
”[ 13]
。
If users need to switch image 2 port, can long press the relevant input shortcut
in the default state, if it is not conflict with the image 1 input port, the input port
of image 2 will be switch to target port directly; Otherwise, will pop up prompt
window, users can cancel operation or forced switching two pictures input port
as demands.
30
