Above the figure, there are 4 lines content, explanation as the following:
Lines
Details
Image 1 (main image, is also default image) port name and current input
First line
signal resolution.
Image 2 (vice image) port name and current input signal resolution.
State prompt area, by several icons to show the machine current working
state.
There are 8 icons areas from left to right: 1
、
Synchronism follow-up state
area (valid in the condition of splicing
function opening state) Splicing state area
2
、
Mosaic status area
3
、
Image freeze state area
4
、
PIP state area
5
、
Image 1 Cropping state area
6
、
Image 3 Cropping state area
7
、
PART (part or full screen) state area
8
、
DVI input resolution lock state area
Check details in next page.
Second line
Third line
Fourth line
Output resolution, check details in“
Output indicators
”[
9]
Default state introduction
Turn on the power supply of Unitech Dcdi 550, in the process of the system
startup, the LCD front panel would display the start interface on the left screen,
when the start completed, there will show the machine’s current state on the
screen as the following figure shows:
13
