Unit UAB-816, Инструкция по эксплуатации

Страница: 18 / 50

CLEANING AND MAINTENANCE
• Disconnect the machine from power outlet and allow it cool down completely before you start to clean
it. To unplug the appliance, never pull the Cord (13).
• Clean the inside of the machine with a damp, slightly soapy dish cloth. Wipe over again with a clean
damp cloth to remove any of the soapy residue.
• To clean the Bread Pan (2). Rub the inside and outside of the Pan (2) with a damp cloth.
• To clean the Kneading Blade (3). If the Kneading Blade(s) (3) is difficult to remove form the axle(s),
soak the Bread Pan (2) in water beforehand. Don't soak the Bread Pan (2) in water for a long time. The
maximum time of the soaking is 60 minutes.
• Clean the Lid (7) and the Window (17), the machine inside and outside with a slightly damp cloth.
• Be careful to protect the non-stick surface; don't use the metal apparatus (such as the spatula, the
knife or fork) for cleaning of the Bread Pan (2).
Note: do not use abrasive or strong household cleaners as these will damage the non-stick surface of the
bread maker.
SPECIFICATIONS
Rated voltage: 230 V, 50 Hz
Power: 550 W
Lifetime: not less than 5 years from the date of purchase
The head office of the manufacturer : «UNIT Handelsgesellschaft G.m.b.H.»
131, Gersthofer Str., A-1180, Vienna, Austria
Exported by: «UNIT Electronics (H. K.) Limited»
3905 Two Exchange Square, 8 Connaught Place,
Central, Hong Kong
Made in People’s Republic of China (P.R.C.)
This appliance is to be stored and used under the following conditions: temperature – not less than
+5°C; relative humidity - not higher than 80%; aggressive impurities in the air: not allowable.
As the Manufacturer is constantly working on the improvement of its products, the design and technical
specifications are subject to change without prior notice.
www.unit.ru
ENGLISH
18
UAB-816 Instr 11/17/08 1:04 PM Page 18