Unisys Aquanta CP Series, Руководство по настройке

Страница: 59 / 89

System Specifications
A–2 3814 9779–000
System Board Memory
•
All memory resides on the system board using industry standard 72-pin SIMM
technology.
•
SIMMs are 60ns, with tin-lead connectors. You can use either EDO SIMMs or
Fast Page SIMMs with parity and ECC mode enabled.
•
Two SIMM sockets are provided for base memory.
•
The system board is upgradeable to 128MB DRAM on the motherboard.
•
SIMMs must be identical in make, type and speed.
•
The BIOS automatically recognizes the new amount of memory and it is not
necessary to run the BIOS Setup program. It recognizes the SIMM with or
without parity. By default, the BIOS does not check for parity. However, the
CMOS can be set to check for parity, if so desired.
Table A–1. Supported SIMM Modules
Non-Parity Parity
4Mx32(16MB) 4Mx36(16MB)
8Mx32(32MB) 8Mx36(32MB)
16Mx32(64MB) 16Mx36(64MB)
Note: If a 36-bit SIMM is installed, use the “ECC/Parity Config” setting in the
CMOS to enable ECC/Parity support.