Unisys Aquanta CP Series, Руководство по настройке

Страница: 50 / 89

Troubleshooting
3–10 3814 9779–000
Table 3–1. Troubleshooting Guide (cont.)
Problem Solution
The characters on my monitor
screen are distorted. Check the monitor interface cable to make sure neither end
has been accidentally pulled free.
Make sure the monitor interface cable is not damaged.
Use the monitor screen controls to adjust the screen
values.
Verify that the video driver and driver type are correct.
The images on my monitor screen
flicker or waver. Check the monitor interface cable to make sure neither end
has been accidentally pulled free.
Make sure the monitor interface cable is not damaged.
Use the monitor screen controls to adjust the screen
settings.
Make sure that nearby fluorescent lights or other monitors
are not causing interference.
Verify that the video driver and driver type are correct.
The entire screen is not displayed. Use the monitor screen controls to adjust the screen
settings.
When I type on the keyboard, the
characters that appear on the
monitor are incorrect. Make sure that no debris has fallen between the keys. Try
turning the keyboard upside down and shaking it to
dislodge any conductive material that may be shorting the
keyboard contacts.
Test the keyboard to find out whether any key is sticking. If
so, someone may have spilled liquid on your keyboard, and
you will have to replace the keyboard.
When I type on the keyboard,
nothing appears on the monitor
screen. Check the monitor and keyboard interface cables to make
sure neither cable has been accidentally pulled free.
Make sure the keyboard interface cable is connected to the
correct system unit receptacle. The keyboard cable fits in
the mouse receptacle, but does not function properly if you
plugged it into the mouse port by mistake.
Verify that the language setting is correct.
Continued