Unisys Aquanta CP Series, Руководство по настройке

Страница: 15 / 89

Upgrading Your System
3814 9779-000 1–3
Avoiding Electrostatic Discharge
All electronic assemblies contain static-sensitive components, and your system can be
damaged by electrostatic discharge (ESD). The risk is greatest when the unit’s cover is
off, and when components are being removed or added. To minimize this risk, take the
following precautions.
Caution
Avoid producing friction static, which occurs most often when walking on
new or newly cleaned rugs, or on any rug in a low humidity environment.
•
While working on the system, wear an antistatic bracelet.
•
Keep static-sensitive components (such as processor chips and video
memory chips) in their packages until you are ready to install them.
•
Before removing a component from its package, sit down and hold
the package in one hand and touch the metal frame of your unit (a
ground) with the other. Then, take the component out and install it
immediately.
•
Handle components by their edges. Avoid touching their leads,
connectors, or contact points.
•
If you need to remove a component from the system, immediately
store it in antistatic packaging.