Unisys Aquanta CP Series, Руководство по настройке

Страница: 53 / 89

Troubleshooting
3814 9779–000 3–13
Table 3–1. Troubleshooting Guide (cont.)
Problem Solution
My workstation cannot see the
network. Make sure all network cables are properly connected and
the NIC jumper settings are correct.
Verify that the proper driver(s) is installed.
My operating system does not
load from the hard disk. Make sure all power cables and drive cables are properly
connected, and that all system and drive jumpers are
correctly set.
Boot DOS or Windows 95 from a floppy disk and run fdisk.
Verify that the hard disk partition is intact.
If you are running Windows NT, boot from the three floppy
startup disks, and select Repair when prompted. You will
need the NT system files, either on floppy or CD, to make
the repair.
The application software I just
installed does not run properly. Make sure your software and system are correctly
configured. For information on software configuration, see
the manuals that came with your application.
Make sure you are using an authorized copy of the
application software.
Make sure that your system unit has enough memory and
disk space to run the program.
Check the keyboard and system board jumper settings to
make sure they are correct.
Verify that the video driver and drive type are correct.