Unipulse TM400, Руководство по эксплуатации

Страница: 50 / 61

43
8 USB Interface
43
US
B Interfa
ce
Chapter
8
- Reading three display values
- Reading three current values
„
Setting value communication format
Transmitted data when writing the setting value, return data when reading the setting value.
Host
TM400 reply
R
Command received by TM400
Delimiter H
R H ,
+ 0 0 0 0 0 0 . 0 0 , + 0 . 0 0 ,
Use of encoder
+ 0 0 0 0 0 Delimiter
Not used: ---------
Used: Angle
Sign
* Character: ASCII
Torque
Sign Sign
Rotation speed
Host
TM400 reply
R
Command received by TM400
Delimiter I
R I ,
+ 0 0 0 0 0 0 . 0 0 , + 0 . 0 0 ,
Torque Use of encoder
+
Sign
0 0 0 0 0 Delimiter
Sign
Rotation speed
Not used: ---------
Used: Angle
Sign
* Character: ASCII
UTM capacity
W 0 1 0 0 0 0 0 0 0 (No writing at Calibration LOCK)
Sign
W 0 2 0 0 0 0 0 0 0 0 (No writing at Calibration LOCK)
Minimum scale
W 0 3 0 0 0 0 0 0 0 0 (No writing at Calibration LOCK)
Low-pass filter
W 0 4 0 0 0 0 0 0 0 0 (No writing at Set value LOCK)
Moving average
W 0 5 0 0 0 0 0 0 (No writing at Set value LOCK)
Upper limit
W 0 6 ± 0 0 0 0 (No writing at Set value LOCK)
Lower limit
W 0 7 ± 0 0 0 0 (No writing at Set value LOCK)
Other capacity *
W 0 8 0 0 0 0 (No writing at Calibration LOCK)
Unit *
W 0 9 0 0 0 0 0 0 0 0 (No writing at Calibration LOCK)
Decimal point *
W 0 A 0 0 0 0 0 0 0 0 (No writing at Calibration LOCK)
Items having * mark are readable/writable when the UTM capacity is set to OTHER
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
Setting value No. Setting value (Max. 8 digits)
*
Only input 0 where the setting value is 0.
Sign or 0 Read:
Delimiter