Sageview
Sageon III Power System
PM990-8800-00, Rev. 9
5-2
SageView includes comprehensive Help. It provides the latest information about program installation and operation, communication
options, and other topics.
5.3 SECURITY
Security is a major consideration when deciding upon a communications strategy that involves sending proprietary data over your
company’s intranet, the Internet, or telephone lines. Before enabling local or remote communications, carefully review your
company’s electronic security policies. Contact your company’s network administrator for details about network structure and
security. The administrator can also furnish an IP (Internet Protocol) address when Ethernet access is needed.
5.4 CABLE AND NETWORK CONNECTIONS
Figure 5-1 shows typical connections for local and remote access to Sageon III Power System data. Additional information is provided
in the SageView Help topic titled Connection Setup.
Local connection details are provided below. Guidelines for remote connections are also provided. Remote connection specifics are
beyond the scope of this manual since actual connections and required hardware are determined by the systems operating within your
System. Consult your company’s network administrator.
5.5 LOCAL CONNECTION, STANDARD
For a local connection, cable the serial port on the Sageon III Power System’s operator panel to the USB port on a Windows-based
PC. A customer supplied USB-A to USB-B cable is required.
5.6 REMOTE CONNECTION, ETHERNET, OPTION
When the Ethernet option is ordered, the Sageon III Power System includes an RJ-45 connector for the Ethernet network cable. As
shown in Figure 5-1, a remotely located Windows-based PC can be connected to your System’s Ethernet network. With the addition
of the necessary hardware (e.g. server with firewall), a remote PC can connect to your System’s network over the Internet.
5.7 PC REQUIREMENTS
•
Microsoft® Windows® 98, ME, NT4, 2000, or XP
•
Pentium III or better microprocessor
•
128 KB or more RAM
•
10 MB unused hard disk space for program and database files
•
CD-ROM drive
•
USB port, with USB-A to USB-B cable
5.8 INSTALLING SAGEVIEW
Before beginning the installation, review the PC requirements above to be sure the PC at hand meets the minimum requirements. Also,
read the ReadMe.txt file on the CD for the latest information about installing and using SAGEVIEW.
1.
Insert the SAGEVIEW CD in your computer’s CD-ROM drive. The opening screen will appear. If it does not appear, click
Start
and then click
Run
. In the
Run
dialog box type d:\setup.exe. Substitute your CD-ROM’s drive letter for “d” as needed.
Содержание Sageon III
Страница 43: ...Installation Sageon III Power System PM990 8800 00 Rev 9 2 22 FIGURE 2 20 SAGEON III BOARD LOCATIONS...
Страница 46: ...Sageon III Power System Commissioning PM990 8800 00 Rev 9 3 3 FIGURE 3 1 SINGLE PHASE FEED PHASE TO NEUTRAL...
Страница 47: ...Commissioning Sageon III Power System PM990 8800 00 Rev 9 3 4 FIGURE 3 2 SINGLE PHASE FEED PHASE TO PHASE...
Страница 50: ...Sageon III Power System Commissioning PM990 8800 00 Rev 9 3 7 FIGURE 3 5 Y THREE PHASE FEED PHASE TO NEUTRAL...
