Micro
ARE-M Series 24V Chargers, Single Phase
Setup and Operation
PM990-1070-24, Issue 12
4-4
Main Menu
Select Status Screens
Charger Status
Charger Model/Firmware Rev.
From Figure 4-1
Parameter Screens
Note:
View Setup
Float Setpoint
Parameter
Equalize Setpoint
values are
LVA Setpoint
read-only in
Battery Temperature
HVA Setpoint
this series of
HVSD Setpoint
menus
NCA Setpoint
Temperature Compensation
CL Setpoint
GND Detect Setpoint
VLVA Setpoint
Periodic Equalize
Hi Bat Temp Setpoint
LVA Delay
HVA Delay
Ground Fault Resistance
HVSD Delay
NCA Delay
CL Delay
Ground Fault Voltages
GND+ Delay
GND- Delay
RFA Delay
ACF Alarm Delay
EQ Alarm Delay
VLVA Delay
HiBatTemp Alrm Delay
Summary Alarm Delay
Alarm Latching
System Alarm Incl.
Summary Alarm Incl.
AC Fail Equalize
AC Fail Equalize duration
Periodic Equalize
Periodic Equalize duration
In all menus:
Press UP or DN to move vertically.
Press SEL to move to the right.
Press ESC to move to the left.
FIGURE 4-2 CHARGER STATUS MENU
-------------------------------------------------------------------------------------------------------------------------------
Main Menu
Mode Screen
Operating Mode
Equalize Mode Enable/Disable
From Figure 4-1
Relay/Lamp Test
FIGURE 4-3 CHARGER OPERATING MODE MENU
+
