VIRDI 3000
TM
User’s Manual
58
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng
4.1.7. Multiple fingerprint authentication
For a door where higher security is required, multiple fingerprints captured from
more than two persons are assigned to a single ID for access to the specific
door. The door opens only when all the registered fingerprints are successfully
authenticated. In the menu, set as below: 3. Option setting
Æ
2. Authentication
method settings
Æ
<1:N authentication >=0
Æ
< multiple fingerprint
authentication >=1.
For example, if the ID “0001” is registered with three different fingerprints, all
three fingerprints must be authenticated for access after ID input. A single
authentication failure in mid course results in overall failure and the whole
authentication process should be restarted. This iterative process continues until
all three fingerprints are authenticated.
▶
If the user ID is ‘0001’, enter ‘1’ or ‘0001’ and press the function key. The light
on the fingerprint input window turns on together with the voice message
“Please enter your fingerprint.” (during auto sensing, fingerprint input alone is
sufficient). When a fingerprint is entered, the authentication result will be
displayed on the LCD window.
== 00:00
0001
If the user ID is ‘0001’, input ‘0001’ and press the
function key.
▼
== 00:00
When the light on the fingerprint input window turns
on together with the voice message “Please enter
your fingerprint”, place your finger and hold it there
until you hear a “ppig” buzzer sound.
▼
== 00:00
If authentication is successfully done, a “ppiririck”
buzzer sounds and the light on the fingerprint input
window turns on together with the voice message
“Please enter your fingerprint”. This iterative process
continues until all inputted fingerprints have been
authenticated.
▼
== 00:00
If authentication is successfully done, a success
message is displayed on the LCD together with a
voice message “You are authorized”. The door LED
turns on and door relay runs.
The default screen appears after 1~2 seconds. The
door LED turns off and door relay is back again after
the door open setting time has elapsed.
※
Error message is same as that of [1:1] authentication.
