
28
72
AT320-09-042
Right transmission cover
73
M8×40 GB4141.14-84
Long socket ball grip
74
8×50×12 GB4141.15-84
Handle lever
75
M4×16 GB67-76
Screws with cylindrical head and groove
76
M8 GB923-76
Enclosed nut
77
AT320-09-024
Adjustment washer
78
AT320-09-025
Handle housing
79
AT320-09-026
Calibrated dial
80
AT320-09-043
Elastic lamella
81
M4×8 GB818-85
Screw
82
AT320-09-045
Handle lever
83
AT320-09-027
Spring seat
84
AT320-09-033
Fastening base
85
AT320-09-028
Secondary shaft
86
5×10 GB1096-72
Flat spline
87
M5×10 GB819-85
Screw
5
•
Use only for purposes for which it has been designed.
•
Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•
Do not overreach, use both hands.
•
Never work under the influence of alcohol or other drugs.
•
Do not use the machine/tool if you feel dizzy or week.
•
Any modifications or improvements to the machine are strictly prohibited. DO NOT USE if you discover
bent part, crack or other damage.
•
Never perform any maintenance during operation.
•
If you see any unusual sign or hear any strange sound, switch off the machine immediately.
•
Do not forget to remove all wrenches and screwdrivers from the machine after use.
•
Before use, make sure all screws are tightened securely.
•
Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
•
Use only original spare parts during repairs.
•
Using extension pieces or accessories not approved by the manufacturer may cause injuries to
the operating personnel.
•
Use suitable tool for particular type of work. Do not overload tools, accessories or the machine. For large
work volume use more powerful machine.
•
Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed. Damages due to machine overload are not covered by the warranty policy.
•
Do not expose to extremely high temperature or direct sunlight.
•
This machine is not designed for use in humid environments or under water.
•
If you are not using your machine, store it in a dry and safe place, out of reach of children.
•
Before use make sure that all safety elements work correctly and efficiently. Make sure all moving parts
are in good working conditions.
•
Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
as designed. Beware of all other conditions that may have a negative effect on the proper functioning of
your machine.
•
If not stated otherwise in this manual, all damaged parts and safety elements must be repaired
or changed.
Assembly
•
Do not use the machine unless completely assembled.
Electrical equipment
•
Observe all basic safety rules when using electrical equipment to prevent risk of fire, injuries by
electrical shock and other hazards. Before using this device, read this manual entirely and follow all safety
instructions.
•
Make sure the power cable plug is plugged into the correct wall outlet. The voltage in the wall outlet must
be the same as shown on the specification label to prevent damage to the electric motor. Too low voltage
will not provide your machine with enough power.
•
Before connecting the machine to the wall outlet make sure that the main switch is in the "OFF" position.
When you finished your work, disconnect the power plug from the wall outlet and switch off the main
switch.
Содержание AT320
Страница 12: ...12 21 Drilling milling head...