Unimax AT320 Скачать руководство пользователя страница 4

4

???

This device may be used by a qualified person, 18 years or older who has been
trained in work and environmental safety procedures. 

Any person using this equipment must possess a medical certificate 
demonstrating his eligibility to operate this equipment.

We recommend placing work safety regulations notices at your workshop:

"Prevent most common injuries" - MILLING MACHINES 

"Prevent most common injuries" - LATHES

Symbols used in this manual

Warning!
This symbol informs you about the risk of personal
injury or damage to the machine or materials.

Caution! 
You are using electrically powered machine!
Risk of injuries by electrical current.

Risk of being caught by spinning machine parts!
Caution! Loose clothing or body parts may get caught
by moving machine parts.

Warning!
Danger of damage.

Note:
Additional information.

Use personal protective gear.

General instructions

Make sure you know how to control your tool or machine and that you are familiar with its operating 

procedure. Know the hazards that may occur, if not used correctly. 

If other person is using this machine make sure that he knows how to safely operate this equipment and

that he is familiar with hazards and risk that may occur, if not used correctly. 

Pay special attention to safety notes and safety labels on the machine. Do not remove or damage them.

If the warning label becomes unreadable, please contact your vendor. 

Dirty and disorganized workplace may cause accidents. 

Never work in poorly lit, narrow or too crowded rooms. Always keep stable posture. 

Maintain your tools clean and in safe working conditions. 

Handles must be kept free of grease and dirt. 

Make sure no children, unauthorized persons or animals have access to your workshop. 

SAFETY PRECAUTIONS

In case of fire do not use water
or foam fire extinguishers

Use protective gloves

Use face protective shield

Danger of having fingers cut

Caution! Electrical equipment

Read manual before use

Caution! Danger of being caught
by machine moving parts

Before use, close the protective cover

Содержание AT320

















Отзывы: