Unimax AT320 Скачать руководство пользователя страница 3

REVISION REPORT

The user is obligated to perform tests and revisions of electrical equipment of the machine 
in accordance with valid rules and regulations. Result report:

DATE

REVISION TECHNICIAN

Number / SIGNATURE

REVISION REPORT

3

Lathe turning operations: 

Voltage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~400 V / 50 Hz 
Power input  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,100 + 370 W 

Maximum cutting diameter above the bed (L)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

320 mm 

Maximum cutting diameter above the support (S)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200 mm 

Maximum work piece length (X)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .750 mm 

Inner chuck diameter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38 mm 

Chuck cone (lathe)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Mk 

Tailstock cone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Mk 

Speed (revolutions) range (lathe)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 - 1,600 (12) rpm 

M thread pitch (degree) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 - 4 (17) mm (degree) 

W thread pitch (degree)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 40 (20) 1/" (degree) 

Maximum cutting knife feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 mm 

Maximum feed of the cross support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 mm 

Maximum longitudinal feed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .750 mm 

Automatic longitudinal feed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.01 - 1.5 mm/revolution 

Automatic cross feed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.025 - 0.34 mm/revolution 

Continuous setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NONE 

Adjustable longitudinal feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .YES 

Adjustable cross feed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .YES 

Tailstock range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 mm 

Number of uni chuck jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 

Fastening diameter of the uni chuck outer/inner (Ui/o)  . . . . . . . . . . . . . . . . . . . . . . . . .

160/200 mm 

Speed (revolutions) setting (milling/drilling machine)  . . . . . . . . . . . . . . . . .260 - 2,620 (4) rpm (degree) 

Head tilt angle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 

Table dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280 × 130 mm 

Spindle cone (milling/drilling machine)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Mk 

Max. drill diameter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16 mm 

Fine spindle feed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200/60 mm 

Spindle set out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 mm 

Maximum distance between the spindle and the table  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265 mm 

Overall dimensions (l x w x h), excluding the base  . . . . . . . . . . . . . . . . . . . . .1,500 × 625 × 1,200 mm 

Gross weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .400 kg

TECHNICAL SPECIFICATION

The accuracy of instructions, graphs and information contained herein, depends on the printing date. Due to

continuous product improvement, the manufacturer reserves the right to change technical parameters of the

product, without prior customer notification.

13

Содержание AT320

















Отзывы: