Unimax AT320, Руководство пользователя, Страница: 16 / 16

16
Position on
picture 6 Lubrication spots Location Method of
lubrication Grease type Lubrication
period
1 Exchangeable
toothed gears, shaft
protection case Left pedestal Lubricate with
pressurized oil Machine oil One year
2 Spindle shaft
bearing (lathe) Lathe spindle Lubricate with
grease Lubrication
grease One year
3 Power drive bearing Left pedestal Lubricate with
grease Lubrication
grease One year
4 Dovetail guide,
screw Support Lubricate with
pressurized oil Machine oil Twice a day
5 Toothed gears,
toothed rack Drilling/milling
spindle Lubricate with
grease Lubrication
grease Once a month
6 Guiding screw of
the knife head,
surface guides Knife head Lubricate with
pressurized oil Machine oil Twice a day
7 Longitudinal feed
screw Feed screw Lubricate with
pressurized oil Machine oil Twice a day
8 Bed/stand guide Bed/stand Lubricate with
pressurized oil Machine oil Twice a day
9 Tip socket Tailstock Lubricate with
pressurized oil Machine oil Twice a day
10 Bearing case Tailstock Lubricate with
pressurized oil Machine oil Twice a day
11 Bearing contact
surface Bed/stand Lubricate with
pressurized oil Machine oil Twice a day
12 Cross nut,
guiding screw Small support Lubricate with
pressurized oil Machine oil Twice a day
13 Bearing case Small support Lubricate with
pressurized oil Machine oil Twice a day
14 Power drive bearing Guide screw
housing Lubricate with
grease Lubrication
grease Six times per
year
15 Counter gear Transmission Lubricate with
pressurized oil Machine oil Twice a day
16 Bearing Driving pulley Lubricate with
grease Lubrication
grease Once a day
17 Toothed gear Drilling/milling
spindle Lubricate with
grease Lubrication
grease Once a year
18 Elevator guide
screw, nut Drilling/milling
spindle Lubricate with
pressurized oil Machine oil Twice a day
19 Column Drilling/milling
spindle Lubricate with
pressurized oil Machine oil Once a day
17
Note:
•
We recommend using lubrication grease with consistency number 3. Applies to the "Lubrication grease"
in the chart.
•
Use machine oil SAE 20. Applies to the "Machine oil" in the chart.
•
All lubricated parts must be cleaned and lubricated. Follow the support oil changing periods. Refill the oil
up to the marking.
•
Follow the lubrication periods recommended in the chart.
•
Used oils and cooling fluids must be disposed off in accordance with the applicable Waste management
law.
When the operational life of your device is over, dispose off it in accordance with valid rules and regulations.
Your product is made of metal and plastic parts that may be recycled when separated.
1. Disassemble all parts.
2. Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you for further processing.
3. Electrical waste (used electrical power tools, electric motors, recharging equipment, electronics,
accumulators, batteries etc.).
Dear customer. In accordance with the valid regional rules and regulations describing the management of
electrical waste, electrical waste is considered dangerous.
Disposal of electrical waste must be therefore handled as dangerous waste in accordance with waste
management rules valid in the state you are in.
It is prohibited to mix electrical waste with regular household waste.
You may return your used electrical appliance to a recycling facility near you. More information about
electrical and dangerous waste disposal may be obtained from your local authority or from the Internet.
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making
a claim at the shipping company the level and method of packaging plays a major role during claim evaluation
process.
Note: Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
DISPOSAL
CAUTION