6.9 ATB Setup Menu
(Service sub menu)
Menu structure may change depending on the specific customer firmware version.
Type 0, Reserved
Type 1, ATB
Type 2, MPD
Type 3, BP
Type 4, Blank
Stock Type
Type 5, BSP ARC
Type 6, Reserved
Type 7, Reserved
Type 8, Reserved
Type 9, Reserved
Select Y/N
ATB Setup
Error on Stock Type
Error on Missing Logo
Select Y/N
Template X Adjust
Enter Value
Template Y Adjust
Enter Value
No Mode Changes
Check-In
AEA Mode
Ticketing
BT Cmd Sets Length
Select Y/N
Notes:
1. AEA Mode allows the operator to select between Check-In and Ticketing modes. The third option is “No Mode Changes” and
is used to modify some AEA responses when they need to be different from their regular response when in either of the two
normal modes.
2. Error on Stock Type allows the operator to enable or disable the error checking function that verifies the stock type selected in
the ticketing data stream match the stock types selected for each bin in the menu.
3. Error on Missing Logo allows the operator to enable or disable the error checking function that verifies that the logo called out
in the ticketing data stream is properly loaded in memory.
4. Template X,Y adjust moves templates left/right or up/down to allow alignment of the templates to AEA row/column
coordinates.
5. BT CMD Sets Length is provided for backwards compatibility. Prior to AEA 95’ the BT command selected stock type but
not length.
Page 17 of 38
71U-1415-100K; REV E
ET6000 Operator’s Manual
