10.0
Troubleshooting
----------------------------------------------------------------------------------------- Page 32
10.1
Basic Failure A
10.2
Basic Alert Mes
nalysis
sages
11.0
Models/Options
------------------------------------------------------------------------------------------ Page 34
11.1
L-Shaped Base Model
11.2
Roll Stock Model
11.3
Roll Stock Dust Cover Model
11.4
Path Dust Cover Model
11.5
Stock Cutter Model
11.6 Display
Options
12.0
Customer/Technical Support
------------------------------------------------------------------------- Page 37
12.1
Return Authorization/Customer Service
12.2 Technical
Support
13.0
Unimark Products, LLC. Warranty Statement
--------------------------------------------------- Page 38
FCC Emission Interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by Unimark could void the
operator’s authority to operate the equipment under these conditions and rules.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at their own cost.
Page 3 of 38
71U-1415-100K; REV E
ET6000 Operator’s Manual
