11.5 Stock Cutter Model
This option allows cutting of the stock as it moves through the print mechanism. The cutter operation is defined by the
per customer requirements. The cutter is mounted in the front of the Unit (below the front
1.6 Display Options
The Unit can be provided with either a 2x20 Backlit LCD or Vacuum Florescent display.
The LCD display uses yellow-green characters on a dark blue background.
The Vacuum Florescent display uses bright blue characters on a dark background.
When the Unit is in the online state, the up and down arrow keys can be used to vary the display contrast. After
approximately 15 seconds of key inactivity, the current display contrast/intensity is saved to memory.
firmware and is customized
panel).
FIGURE 11.5: Stock Cutter Model
1
ET6000 Operator’s Manual
71U-1415-100K; REV E
Page 36 of 38
