Enhanced phone functions
61
Placing a call on hold
You can use this function to place an ongoing call on hold, for instance, to pre-
vent the other party overhearing a conversation with a colleague in the same
room.
Prerequisite:
You are conducting a call.
Select and confirm the option shown.
Retrieving a held call
Select and confirm the option shown.
Held call wait status
After placing a call on hold, you can replace the handset and then decide wheth-
er to retrieve the call or disconnect.
Prerequisite:
You placed a call on hold and replaced the
handset
or (only
OpenStage 20/20 G) pressed the loudspeaker key in speakerphone mode.
A recall follows immediately and a pop-up menu appears on the display:
Select and confirm the option shown to resume the call in speakerphone mode.
or
Select and confirm the option shown to disconnect the call.
Hold ?
f
If you do not retrieve the held call after a defined time interval, a reminder
beep sounds three times and a prompt to retrieve the call or disconnect
appears on the display. The settings for this can be found on
and
Reconnect ?
l
Retrieve held call ?
l
Disconnect ?
f
If you enabled "Hold and hang-up" (
Page 63), the call is placed on hold
for a defined time interval (
Page 62) before the prompt is displayed with
a recall to retrieve the call or disconnect.