Basic functions
35
Immediate dialling
Immediate dialling should only be activated if administrator has configured and
approved a dial plan.
Immediate dialling is deactivated by default. For this reason after entering the
number you must either confirm the "Dial" option or wait until the dial delay ex-
pires to set up the connection. If
Immediate dialling
is configured, your call is
automatically dialled as soon as the string entered matches an entry in the dial
plan.
Activating or deactivating immediate dialling
z
You can also configure this setting via the WBM interface
N
Press the key shown.
Select and confirm the option shown.
Confirm.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Confirm.
Select and confirm the option shown.
Select and confirm the option shown to activate the immediate dialling function.
Select the option shown and confirm twice.
Dialling using the hot or warm line function
Your administrator can configure a hot or warm line for your phone.
If you lift the handset of the phone or press the loudspeaker key (only
OpenStage 20/20 G)
• with a hot line immediately or
• with a warm line after a defined period of time,
• a number specified by administrator is dialled.
Examples:
• The phone in the lift immediately dials the reception number.
• The phone at a patient’s bed dials the ward number e.g. after a minute if no
other number is dialled.
Settings
User
Configuration
Outgoing calls?
Immediate dialling = No
m
Yes
l
Option = Save & Exit
l