Enhanced phone functions
59
Select the option shown and confirm twice.
Rejecting a call
You can reject an incoming call.
Prerequisite:
An incoming call is displayed or signalled. "Reject" must be au-
thorised by administrator.
Select and confirm the option shown.
The caller hears a busy signal.
Configuring call forwarding
z
You can also configure this setting via the WBM interface
N
Press the key shown.
Select and confirm the option shown.
Confirm.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring forwarding
Select and confirm the option shown.
For a description of the settings, refer to section ”Standard call forwarding”
Page 43 or ”Call forwarding by call type”
Entering a destination phone number is not mandatory when call deflec-
tion is active. If you want to deflect an incoming call, you are prompted to
enter a destination phone number if there is none stored.
Option = Save & Exit
l
Reject?
f
If the rejected caller’s phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.
You can also enter the call forwarding settings via the Forwarding key
(
Settings
User
Configuration
Incoming calls
Forwarding?
Settings?
