62
Enhanced phone functions
Activating/deactivating the hold reminder tone
z
You can also configure this setting via the WBM interface
N
Press the key shown.
Select and confirm the option shown.
Confirm.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown and confirm twice.
Setting the hold reminder time
Use the "Hold reminder" function to set the time after which you want to receive
an automatic reminder about a held call.
The minimum value is 3, that is, the reminder is output after three minutes. The
maximum value is 15 minutes.
z
You can also configure this setting via the WBM interface
N
Press the key shown.
Select and confirm the option shown.
Confirm.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter a value between 3 and 15 in the input mask and confirm.
Select the option shown and confirm twice.
Settings
User
Configuration
Connected calls?
Allow hold rem. = No
f
Yes
l
Option = Save & Exit
l
Settings
User
Configuration
Connected calls?
Hold rem. delay=3
f
Option = Save & Exit
l