Unify OpenScape 600 Скачать руководство пользователя страница 130

Страница: 130 / 233

130

Sending a vCard

Sending to a paired device

Prerequisite:

The receiving device is included in the list of paired devices, Blue-

tooth is activated on the device and can receive vCards.

μ€

Select the required contact from the Conversations menu.

The selected contact is highlighted.

Open the contact.

Press the Softkey. The menu for paired devices opens. A search is initiated for
devices.

Use the Softkey to confirm sharing on the relevant paired device. The vCard for
the entry is sent. (You will receive confirmation).

Perform the necessary steps on the destination device to save the vCard data.

Sending to an unpaired device

Prerequisite:

Bluetooth is activated on the device and the device can receive

vCards.

μ€

Select the required contact from the Conversations menu.

The selected contact is highlighted.

Open the contact.

Press the Softkey

. The menu for paired devices opens. A search is initiated for

devices. Wait until the relevant unpaired device appears.

Use the Softkey to confirm sharing on the relevant device. The vCard for the
entry is sent (you will receive confirmation).

Perform the necessary steps on the destination device to save the vCard data.
Detected devices are then deleted from the list.

Georg Simon Ohm

- O

Send contact

‡

†

Smartphone

‡

Georg Simon Ohm

- O

Send contact

‡

†

Tablet

‡

Содержание OpenScape 600










































































































































































































































Результаты поиска

Содержание OpenScape 600

Отзывы:

Бренды по названию

Популярные бренды

Unify OpenScape 600, Руководство пользователя

Результаты поиска

Содержание OpenScape 600

Отзывы:

Бренды по названию

Популярные бренды