background image

 

 

Legal and Safety Notices 

Intended Use of NT-ware Products 

NT-ware  products  may  only  be  used  for  the  applications  specified  in  this  manual  and  the  associated 
technical documentation. If third-party products and components are used, they must be recommended or 
approved  by  NT-ware.  Use  NT-ware  products  only  with  accessories  approved  by  us.  Correct  and  safe 
operation  of  the  products  requires  proper  transport,  storage,  installation,  assembly,  commissioning, 
operation  and  maintenance.  The  permissible  ambient  conditions  must  be  observed.  Notes  in  the 
corresponding documentation must be observed. 

Qualified Staff 

The  device  this  documentation  belongs  to  may  only  be  operated  by  staff  qualified  for  the  relevant  task, 
observing  the  documentation  belonging  to  the  respective  task,  in  particular  the  safety  and  warning 
instructions contained therein. Due to their training and experience, qualified staff is able to recognize risks 
and avoid possible dangers when operating this device. 

Modifications 

Changes and/or modifications of the device not approved by NT-ware will make void the users' authority to 
operate the device. Modification of a device also invalidates CE, FCC and other certifications and will void 
the warranty. 

Defective Devices 

Do  not  use  defective  devices,  cables  or  accessories.  Defective  devices  must  be  disconnected  from  the 
power  supply  immediately.  Please  note  that  repairs  to  electrical  devices  may  only  be  carried  out  by 
qualified staff. 

Cleaning 

Clean the device with a slightly dampened cloth that has been wrung out well. Turn off the power, unplug 
the  device  and  unplug  the  USB  connector  before  cleaning.  Never  use  alcohol,  benzene,  paint  thinner, 
aerosol  sprays  or  any  other  highly  flammable  substance  for  cleaning.  Improper  cleaning  can  lead  to 
malfunctions. 

Liability Exclusion 

We have checked the contents of this document for compliance with the hardware and software described. 
Nevertheless,  deviations  cannot  be  ruled  out,  so  that  we  do  not  assume  any  guarantee  for  complete 
conformity. The information in this publication is regularly checked, necessary corrections are included in 
the following editions. 

Содержание MiCard MultiTech4



















































Отзывы: