UniFlow MiCard MultiTech4, Руководство по установке и настройке

Страница: 47 / 50

MiCard MultiTech4
35
Question Answer Question ID
readers offered by NT-ware? MultiTech4.
Can MiCard MultiTech4 card readers
be utilized with uniFLOW / uniFLOW
Online / uniFLOW Online Express /
Universal Login Manager? Yes, MiCard MultiTech4 card readers can be utilized with all
software solutions offered by NT-ware. MMT004
Can MiCard MultiTech4 card readers
be utilized with the uniFLOW
Release Station? Yes, MiCard MultiTech4 card readers can be utilized with the
uniFLOW Release Station on a project basis. This is currently
not available on the NT-ware price list. MMT005
MiCard MultiTech4 card readers are
available with 45cm USB cables. Is it
possible to attach a longer USB
cable? Yes, NT-ware offers a USB Extention Cable (140 cm), which is
available on the NT-ware price list. MMT006
MiCard MultiTech4 card readers are
displayed as "MiCard PLUS" within
the "List View" of the uniFLOW user
interface. Is this by design? Yes, this is currently by design. NT-ware is already working on
an improved mechanism to identify the attached card readers
correctly. MMT007
The AppBlaster (NT-ware Edition)
displays an error message when
searching for available templates.
How can this be resolved?
Error message:
No templates found.
The AppBlaster (NT-ware Edition) will try to load available
firmware templates on startup. If this is is not possible, e.g.,
due to insufficient access rights of the logged-in user, please
right click on "AppBlaster.exe" and select "Run as
Administrator" to resolve the problem. MMT008
The MiCard MultiTech4 can be
configured to accept Configuration
Cards by utilizing the AppBlaster
(NT-ware Edition). Why is this
setting not enabled by default? Due to security reasons, this setting is disabled within the
default NT-ware firmware image. "Accept Configuration Cards"
can be enabled in self-created firmware images, though. The
firmware image stored on the Configuration Card can be
configured to not allow any further configurations through a
Configuration Card. This can be useful in case a customer starts
with Configuration A but wants to switch to configuration B at
a later stage without allowing the usage of Configuration Cards
in general. MMT009
Can multiple MiCard MultiTech4
card readers be configured at the
same time utilizing the AppBlaster
(NT-ware Edition)? This is currently not possible, but a feature request has been
raised with ELATEC to get this functionality included in an
upcoming version of the AppBlaster (NT-ware Edition). MMT010
Are the Canon (eULM) device series
supported? Yes, the devices accept the card reader configured in USB
keyboard mode. MMT011
Are there any plans to introduce a
uniFLOW functionality to distribute
firmware images (card reader
configurations) to MiCard
MultiTech4 card readers similar to
the MiCard PLUS configuration file
upload? Yes, it is planned to provide a possibility to configure MiCard
MultiTech4 card readers remotely.
MMT012
When configured in "Tracer Mode"
the output in Notepad looks
unreadable. Can this be changed? If the MiCard MultiTech4 is configured in "Tracer Mode", the
keyboard layout of the Windows operating system must be set
to QWERTY/QWERTZ. Otherwise, the read-out card data is
misinterpreted. MMT013