Contact Tech Support at 1.800.215.7015 or email at [email protected]
22
iMPOrtant:
Verify that you have left at least 20 feet of vertical separation space
between the indoor and outdoor antennas.
1
Never point the front of the yagi signal
(outdoor)
antenna towards
the inside of the distribution
(indoor)
antenna.
2
Verify that the supplied coaxial cables from both the signal
(outdoor
)
antenna and the distribution
(indoor)
antenna are properly
connected to the cellular booster before powering it up.
3
Carefully plug in the supplied 110-volt power adaptor into the back
of the cellular booster where it is marked ‘power’ and connect the
other end to a power outlet.
4
Warning!
Using a power supply that is not
included in your kit could damage your equipment
and void your warranty.
CHeCk tHe Cellular bOOSter led
alarM ligHtS
Your cellular booster comes equipped with electronic sensors designed to
identify cellular signal overload or oscillation which can hinder signal-boosting
performance. Your cellular booster is specially designed to automatically
decrease gain to compensate for these circumstances. The device also has a
feature to automatically shut down in case of excessive oscillation.
!
Содержание U60 4G CELLULAR BOOSTER UNI-2005-CPAL
Страница 1: ......
