Contact Tech Support at 1.800.215.7015 or email at [email protected]
13
run COaXial Cable
Loosely run the coaxial cable from your outdoor antenna to your booster. (after
you have tested the system you can permanently secure the coaxial cable).
as you route and pull cabling, follow these
general guidelines:
•
Bend cables and route them smoothly, and protect the outer skin
against any damage.
•
Keep horizontal cables straight and fasten them with a tie every three to five
feet.
•
Bind and fasten vertical cables every six to eight feet.
•
Waterproof all outdoor connections with silicone caulking
•
Be careful when plugging the connector in so as not to damage
the center pins on the connectors.
inStall tHe Signal (OutdOOr) antenna
Mount the signal (outdoor) antenna:
The signal antenna should be located as high as possible in order to capture the
best quality signal from the cellular tower.
When installing a directional antenna, in order to avoid large trees or obstacles,
you may need to slightly tilt the antenna upwards to capture a usable signal.
Use the mounting hardware in the kit to attach the signal (outdoor) antenna to
the building.
Connect the signal (outdoor) antenna:
Connect the supplied coaxial cable to the antenna. We recommend applying
silicone caulking to fully waterproof the connection.
Attach the cable in such a way that a drip loop is formed.
(see image next page).
Once mounted, connect one end of the coaxial cable to the signal (outdoor)
antenna and the other end to the cellular booster where it is marked “outdoor”.
Содержание U60 4G CELLULAR BOOSTER UNI-2005-CPAL
Страница 1: ......
