Uniden U60 4G CELLULAR BOOSTER UNI-2005-CPAL, Инструкция по эксплуатации

Страница: 10 / 36

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
10
This guide will help you properly install your cellular booster kit. It is important
to read through all of the installation steps before installing your equipment.
Thoroughly read through the instructions, visualize where all the equipment will
need to be installed and do a soft installation before mounting any equipment.
If you do not understand the instructions in full, please contact technical
support at
1-800-215-7015.
OVerVieW
bOOSter – select location
Install the booster in an area that is protected from the
weather, properly ventilated and is away from excessive heat
and moisture.
1
Signal antenna (outdoor) - select location
Mount the signal (outdoor) antenna in an elevated outdoor
location so that it points towards the cellular tower and away from
where the inside antenna will be located.
2
OutdOOr COaXial Cable - select location
The outdoor coaxial cable is used to connect the signal
(outdoor) antenna to the booster.
3
indOOr COaXial Cable - (if used)
The indoor coaxial cable is used to connect the distribution
(indoor) antenna to the booster.
4
diStributiOn antenna (indoor)
The ideal location for the distribution antenna will be the area of your
property where you need to improve the signal most.
nOte: the signal strength will be strongest closest to the antenna.
5