Uniden U60 4G CELLULAR BOOSTER UNI-2005-CPAL, Инструкция по эксплуатации

Страница: 23 / 36

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
Improper equipment installation and unusable signal quality can cause
oscillation, this is why it is important to fully understand the LED alarm lights on
your booster, as they will help you identify and solve any potential issues.
The color of the LED indicates the status of the booster system.
led indiCatOrS
The color of the LED indicates the status of the booster for each of these
frequencies.
There is one alarm LED light for each of the cellular frequency ranges.
CHeCking tHe Signal StatuS
The signal indicator’s LED will notify you as to whether your cellular booster is
experiencing any oscillation or feedback. The purpose of these LED’s is to allow
you to fine tune your booster to achieve optimal signal quality.
The bullet list below indicates what measure should be taken based on the color
of the LED alarm lights.
green:
indicates the system is working properly.
Orange:
the system is experiencing slight oscillation and requires slight
adjustment. See next page for adjustment procedures.
red:
the system is experiencing severe oscillation. Turn the unit off and make
adjustments as outlined on the next page.
Off:
if the LED is off it is likely the system went into oscillation so severe that
the auto gain and level control circuits turned the cellular booster off.
23