B A S I C S [ 3 2 ]
w w w . u n i d e n . c o m
Redialing a Call
The last three phone numbers dialed can be quickly redialed from the handset or base.
1) With the phone in standby mode, press
redial/p/vol
on the handset or press
the
REDIAL
soft key on the base.
2) Press
volume up/down
. Each press of
volume up/down
will display one of the
last three number redialed.
3) Press
talk/flash
or
speaker
on the handset (or pick up the corded base handset,
or press
speaker
on the base). The selected number is dialed.
4) To hang up, press
end
(or return the corded base handset to the base, or press
speaker
on the base).
From the handset, you can dial the last number dialed. During a call, press the
MENU
soft key. Use
volume up/down
to select
Re d ia l
and then press the
OK
soft
key. Press the
DIAL
soft key. The number will be dialed.
Adjusting the Earpiece and Speaker Volume
Earpiece and Speaker Volume
You can select earpiece volume from among six volume levels
on the handset and the base. For speaker volume, select from
among six volume levels on the handset and ten volume
levels on the base. Pressing
volume up/down
on the handset
or base during a call will change the earpiece or speaker
volume. This setting will remain in effect after the telephone
call has ended.
•If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
•If the redial memory is
empty, you will hear a
beep.
•Redial numbers stored
in the handset and the
base are independent
from each other.
•To store or delete a
redial numbers, see
page 41.
note
BASI
CS
UP779B.book Page 32 Wednesday, July 13, 2005 4:32 PM