[ 2 9 ] B A S I C S
w w w . u n i d e n . c o m
1) Remove the handset from the cradle.
2) Dial the number.
If pause is required, press
redial/p/vol
.
P
appears in the display, which
represents a pause
3) Press
talk/flash
.
From the Handset Speakerphone
1) Remove the handset from the cradle.
2) Press
speaker
.
3) Listen for the dial tone.
4) Dial the number.
5) When the other party answers, talk into the microphone.
From the base
1) Pick up the corded handset, or press
speaker
.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Dial the number.
If pause is required, press the
PAUSE
soft key.
2) Pick up the corded handset, or press
speaker
.
•To set "AutoTalk", see
page 20 or to set
"Anykey Answer" see
page 21.
•The handset
microphone is located
at the bottom of the
handset. Position
yourself as near to the
handset as possible
and speak clearly.
•The base microphone is
located under the
base. Position yourself
as near to the base as
possible.
note
BASI
CS
UP779B.book Page 29 Wednesday, July 13, 2005 4:32 PM