10
Attach The Outdoor Camera
1
2
4
3
Loosen the
wingnut to
unlock the
mounting
post.
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
Tighten the brace against
the camera to
secure it
in place.
Antenna
1. For each camera,
attach the cam-
era bracket to the
mounting screw. You
can attach the stand
to the top or the bot-
tom of the camera as
needed.Tighten it a
few turns, then turn
the camera to face
the direction you want.
5. Attach the antenna to the rear of the camera.
6. Connect one end of an AC adaptor to the camera’s power pigtail
and plug the other end into a 240 volt AC (standard indoor) power
outlet. (If necessary, connect the extension cord to the camera’s pig-
tail and connect the AC adaptor to the extension cord.)
Be sure the power plug and the connector are tightly twisted
together to avoid water leaking in.
7. Make sure the Power status light turns on. If it doesn’t, try reconnecting the AC adaptor, and
make sure the power outlet isn’t controlled by a wall switch.
2. Tighten the camera brace up against
the camera to secure it into place.
3. Unlock the mounting post by turning
the wingnut to the left a few turns.
4. Set the mounting post to the correct
angle, then tighten the wingnut until
the post is locked into place.
