background image

Install the Base Unit on a Desk or Tabletop

1. Place the Base Unit on

a desk or tabletop, and
plug one end of the

long

 Telephone Line

Cord (supplied) into
the “LINE IN” jack on
the Base.

2. Plug the other end of

the 

long

 Telephone

Line Cord into the
telephone wall jack.

3. Plug the AC Adapter

cord into the AC
Adapter input jack on
the Base Unit.
(Note: 

Use only the AC Adapter supplied with the 

EXP 901

.

)

Caution!

The AC Adapter included with this phone
may be equipped with a polarized
alternating-line plug (a plug with one
blade wider that the other.) This plug fits
into the power outlet only one way. If you
are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug
should still fail to fit, contact an electrician
to replace the obsolete outlet. Do not
alter the shape of the blades to the polarized plug.

4.

Plug the AC Adapter into a standard 120 VAC wall outlet.

5.

Route the power cord where it will not create a trip hazard, or where it
could become chafed and create a fire or other electrical hazards.

The unique design of your EXP 901 lets you to put the Handset on the
Base Unit either face down or upright. Also, you may extend the legs on the
bottom of the Base Unit, placing it at an angle for better LED visibility.
Remove the Handset Support in the charging cradle so the handset
remains in a stable, upright position. The Rechargeable Battery Pack in the
Handset automatically recharges in either position.

7

Содержание EXP901



























Отзывы: