Uniden EXP901, Руководство пользователя

Страница: 9 / 26

Mounting on a Standard Wall Plate
1. Plug one end of the
short
Telephone Line
Cord (supplied) into the
“LINE IN” jack on the top
of the Base Unit. Lay
the cord inside the
molded channel on the
bottom of the Wall
Mount Adapter
connected to the
Base Unit.
2. Plug the other end of
the short Telephone
Line Cord into the
telephone wall jack.
3. Plug the AC Adapter
cord into the AC
Adapter input jack on
the Base Unit.
(Note:
Use only the AC
Adapter supplied with
the
EXP 901 . ) Place the cord inside the molded channel on the Wall
Mount Adapter connected to the Base Unit.
4. Place the Base Unit on the two posts of the wall plate and slide
downward to secure. Then hang the Handset on the Base Unit.
5. Plug the AC Adapter into a standard 120 VAC wall outlet.
6. Route the power cord where it will not create a trip hazard, or where it
will not become chafed and create a fire or other electrical hazards.
If you do not have a standard wall plate, you can mount the Base Unit
directly on a wall.
Mounting Directly on a Wall
1. Carefully select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a hazard when
inserting screws into the wall.
2. Insert the two mounting screws 3
5
⁄
16
inches apart vertically, allowing
about
1
⁄
5
of an inch between the wall and screw heads for mounting the
phone. Make sure the screws are securely fastened, and that the wall
material is capable of supporting the weight of the Base Unit;
otherwise, damage to the Base Unit could result.
3. Plug one end of the short Telephone Line Cord (supplied) into the
“LINE IN” jack on the Base Unit. Lay the cord inside the molding on the
Wall Mount Adapter connected to the Base Unit.
9