Uniden EXAI4580 - EXAI 4580 Cordless Phone Скачать руководство пользователя

Страница: 37 / 64

Recording.a.personal.outgoing.message.(Greeting)

) With the phone in standby, press and hold

[greet]

. You will hear the announcement "Record greeting" and a

confirmation tone. [ ] flashes on the message counter.

2) Start recording your message. You have 30 seconds, and the message counter starts to count down [

] to [ ]

every second.

3) When you are finished recording your greeting, press

[greet]

[

] (play/stop)

[set]

. You hear a confirmation

tone, and then your greeting plays back for you. See "Selecting the Message Record Time" on page 33 on how

to set the announce only feature.

Note:

•. Your.greeting.must.be.more.than.2.seconds.and.less.than.30.seconds.to.record...

•. Position.yourself.as.near.to.the.base’s.microphone.as.possible.and.speak.clearly.when.recording.

your.outgoing.message.

Choosing.between.the.two.outgoing.messages

With the phone in standby, press

[greet]

to play the current outgoing message. While the outgoing message

is playing, press

[greet]

again to switch between the prerecorded greeting and the personal greeting. After the

message finishes playing, a confirmation tone is heard.

Note:.To.delete.the.personal.greeting,.press.[

] (delete) during the announcement and the system

announces."Greeting.has.been.deleted."

Содержание EXAI4580 - EXAI 4580 Cordless Phone

































































Результаты поиска

Содержание EXAI4580 - EXAI 4580 Cordless Phone

Отзывы:

Похожие инструкции для EXAI4580 - EXAI 4580 Cordless Phone

Бренды по названию

Популярные бренды

Uniden EXAI4580 - EXAI 4580 Cordless Phone, Руководство пользователя

Результаты поиска

Содержание EXAI4580 - EXAI 4580 Cordless Phone

Отзывы:

Похожие инструкции для EXAI4580 - EXAI 4580 Cordless Phone

Бренды по названию

Популярные бренды