manualshive.com logo in svg

Uniden EXAI4580 - EXAI 4580 Cordless Phone, Руководство пользователя

Поделиться
Скачать
Uniden EXAI4580 - EXAI 4580 Cordless Phone Скачать руководство пользователя страница 38

37

Setting.the.Base.Ringer.Volume

The base has three ringer volume settings: high, low, and off. You can change 

the ringer volume while in standby or while an incoming call is ringing.

)  Press 

[ringer]

. You hear the ringer at the current volume level ([ 

 ] High, 

[ 

 ] Low, [ 

 ] off) (if you set the base ringer volume to off, "Ringer off" is 

announced) and it is displayed on the base.

2)  Press 

[ringer]

 repeatedly until the desired ringer option appears.

3)  The system displays the new ringer volume.

Note:.Even.when.the.base.ringer.is.turned.off,.the.handset.will.

still.ring.

Temporarily.Mute.the.Base.Ringer.and.Call.Screen

Press [

] (play/stop) to temporarily mute the incoming ring and call screen. The ringer will sound with the next 

incoming call. To turn the ringer back on for this call, press 

[ringer]

. To hear the answering machine and screen this 

call, press 

[vol/select/

]

 or 

[vol/select/

]

.

Adjusting.the.Speaker.Volume.Level

You can adjust the volume of the base speaker by pressing 

[vol/select/

]

 or 

[vol/select/

] 

on the base. Press  

[vol/select/

]

 for louder or 

[vol/select/

]

 for softer while the base speaker is being used except for menu mode. 

The numbers [   ] - [   ] are displayed on the base indicating the volume levels. [   ] being the softest and [   ] being 

the loudest.

Содержание EXAI4580 - EXAI 4580 Cordless Phone

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды