Uniden DXAI4588 Series Скачать руководство пользователя

Страница: 58 / 68

Important.Safety.Instructions

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk of fire,

electric shock and injury to persons, including the following:

. Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric

shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity

of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local authorities for possible battery

disposal instructions.

5. Do not disassemble any component of this product.

SAVE.THESE.INSTRUCTIONS

CAUTION!

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions. Do not

open or mutilate the battery, and disconnect the battery before

shipping this product.

The.FCC.Wants.You.To.Know

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA.

On the bottom of this equipment is a label that contains,

among other information, a product identifier in the format US:

AAAEQ##TXXXX. If requested, this number must be provided

to the telephone company.

An applicable Universal Service Order Codes (USOC)

certification for the jacks used in this equipment is provided (i.e.,

RJC) in the packaging with each piece of approved terminal

equipment. A plug and jack used to connect this equipment to

the premises wiring and telephone network must comply with

the applicable FCC Part 68 rules and requirements adopted by

the ACTA.

A compliant telephone cord and modular plug is provided with

this product. It is designed to be connected to a compatible

modular jack that is also compliant. See installation instructions

for details.

The REN is used to determine the number of devices that may

be connected to a telephone

line. Excessive RENs on a telephone line may result in the

devices not ringing in response to an incoming call. In most but

not all areas, the sum of RENs should not exceed five (5.0). To

be certain of the number of devices that may be connected to

a line, as determined by the total RENs, contact the telephone

provider. For products approved after July 23,

2001, the REN for this product is part of the product identifier

that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g.,

03 is a REN of 0.3). For earlier products, the REN is separately

Содержание DXAI4588 Series





































































Результаты поиска

Содержание DXAI4588 Series

Отзывы:

Похожие инструкции для DXAI4588 Series

Бренды по названию

Популярные бренды

Uniden DXAI4588 Series, Руководство пользователя

Результаты поиска

Содержание DXAI4588 Series

Отзывы:

Похожие инструкции для DXAI4588 Series

Бренды по названию

Популярные бренды